Sprocket/Transmission Options

Voltrium offers three different transmission options for the Rogue series of scooter. These include a Hill climbing kit, speed kit and Balance kit (installed by default).

Torque kit – This kit is used if you require more torque to go up hills or weigh close to the max weight capacity of the scooter. The kit will however reduce the top speed of the scooter and increase the acceleration, which can make the scooter trickier to handle on start. Some customers have found this kit good because they live in a particularly hilly area or they were running the scooter through tough terrain, like sand, grass etc. However please note that its recommend to use these scooters on sealed surfaces.

 

Parts:

1 x 70T 25H Sprocket (Rear Axle)

1 x 110 Link 25H Chain

1 x 11T 25H sprocket (Motor)

 

Recommendation:

  • All Rogue Series Scooters
  • Live in a particularly hilly area
  • Replace after 1000km or riding or when the teeth have worn down
Torque Kit

Speed Kit – This kit is used to increase top speed so you can go faster along straights or down hills. The kit will however reduce the amount of torque that can be produced at the wheel, which means that you won’t be able to take off as quick and it will take longer to reach top speed, so you will need quite a long straight for this sprocket to be worthwhile. This sprocket is not recommend to be used on any Rogue series scooters except the Rogue 2000w Lithium or Rogue 2000w Lead (if you are a light rider). The other scooters simply do not have enough power to get up to speed. If you do decide to use this kit on a less powerful scooter you should be on the lighter side around 65km-70kg to notice any difference, otherwise the scooter might actually go slower and have reduced acceleration.

 

Parts:

1 x 44T T8F Sprocket (Rear Axle)

1 x 82 Link T8F Chain

1 x 11T T8F sprocket (Motor)

 

Recommendation:

  • Rogue 2000w Lithium
  • Long Straight and or Downhill
  • Replace after 1000km or riding or when the teeth have worn down
Speed Kit

Balance Kit – This kit is used to get a balance between torque and top speed. The kit comes installed on all Rouge scooters by default and in most cases will be the most ideal choice.

 

Parts:

1 x 54T T8F Sprocket (Rear Axle)

1 x 88 Link T8F Chain

1 x 11T T8F sprocket (Motor)

 

Recommendation:

  • All Rogue Series Scooters
  • Replacement of old sprockets
  • Replace after 1000km or riding or when the teeth have worn down
Balance Kit

2 Comments

  1. Mick on June 30, 2021 at 7:40 pm

    I was looking at getting a hub drive scooter, but didn’t know much about them. Now that I do there’s no chance of getting it. Voltrium have the best scooters going in the country with out doubt. Build wise,speed wise and simply how a scooter should be.

  2. Pete on July 7, 2021 at 9:11 pm

    What an absolute BEAST these scoots are…Build quality is class leading…and the TORQUE is INSANE!!!

Leave a Comment